CARTON STAPLERS

The full strength of corrugated boards is achieved with a bottom clincher stapler, since the staple clinches every board layer, while the compression action fully utilizes the board's springiness. The bottom of the box will remain stable for as long as necessary.

When a large number of boxes must be closed, a pneumatic bottom closer should be used, the modular design permits adoption for special requirements.

Bottom carton staplers are available for either narrow or wide crown carton staples.

See our Bottom carton staplers

A top carton clinching stapler does not need counter pressure, which makes it ideal for fast and secure closing of lids. Top carton staplers are available in both manual and pneumatic versions.

The pneumatic models are rapid cycling, with efficient silencing and ergonomically shaped hands. The stapling depth can be set to any of five levels. The manual models have the same lower design and are ideal where there is no compressed air supply available or a greater degree of movement is needed.

Top carton staplers are available for C or A type carton staples (1 1/4", 1 3/8" crowns)

See our Top carton staplers

Trays, corners and edges are best joined with side-arm staplers or pliers. We have four side-arm clincher stapler versions, all in stock.

The compressed air driven plier provides increased freedom of movement and is particularly suitable for getting into places with difficult access. The plier nose and tongue are specially shaped to apply the correct compression to the board.

Side-arm carton staplers are available for either 53/F type or 561/C type carton staples. Pliers are available for 590, 777 or 779 carton staples.

See our Tray/Side carton staplers