Staple Headquarters® Since 1947
We Service and Repair the Tools We Sell
1- 877- 463- 2531   8 am-5:30 pm EST, Mon - Fri | Se Habla Español | Email Us

site search SEARCH

Staple Headquarters Since 1947

Buying the correct stapler for a specific application requires carefully matching the stapler and its staple to the intended job. You need informed expert advice to assist you with that selection. We have been exclusively in the stapling business for more than 67 years and are dedicated to matching customer needs with the best stapler and staple to meet those needs.

Salco offers a complete selection of heavy-duty office, commercial, industrial, and specialty staplers, staples, and related products. We maintain a comprehensive inventory and most items ship the same day they are ordered. We provide unmatched customer service including full after-sales warranty service, repairs and parts. Our stapling products will meet or exceed your requirements, at competitive prices.

Call us today at 1-877-463-25311- 877- 463- 2531

Product Categories



Manual pliers, light and heavy duty
 

Manual gun tackers, outward clinch tackers
 

Heavy duty staplers for office applications. Long reach staplers for booklet making.
 

Electric office staplers and booklet makers


Arrow staple & nail guns. Cordless staple guns
 

Rapid, Bostitch, and Salco Hammer tackers
 

Pneumatic staple guns: Fasco, JK, Bostitch. 23 Ga Pinners & Bradders
 

Pneumatic plier staplers: JK, Bostitch, Salco


Picture frame brad nailer, hard & flex point driver
 

Hog ring pliers. Manual & Pneumatic hog ring bag sealers
 

Top Carton Staplers. Roll staplers. Tri-wall carton stapler.
 

Staplers & Tray staplers. Steel strapping tool


Pneumatic, electric, and hand pinners/ bradders
   

Bostitch MIIIFS and similar Spotnails FS7550 Flooring staplers
 
Staplers Accessories,, repair kits etc.
   

Steel strapping tool, CO2 compressor kit

Office, Industrial, carton Closing, Upholstery, Stainless Steel, Flooring staples...
 
Brads, Pins, Flexi points, Brad nails, Upholstery Tacks...
 
Spenax, Max, C-type, D-type, stainless, and Aluminum rings available
 
Bookbinding wire. Carton box stitching wire.


*** NEW ***

*** NEW ***


Customer Service




Shipping Options


Same day shipping for orders placed before 4 pm EST
UPS, USPS, and shipment by truck available
Free Shipping for most pneumatic and electric tools!


Ask the expert in stapling applications

- Hi, I'm inquiring about any cordless staplers able to handle a 5/8 staple for an industrial application. Please contact me with any options available…
Best Regards,
Jay.

The Expert: - Jay, Thank you for your enquiry. There are no cordless electric tackers made that can drive a 5/8” leg length staple. Cordless [or 110V corded] electric staplers do not have sufficient power. However, we have a portable belt-hung CO2 power kit that works in conjunction with several medium/H-D pneumatic gun tackers taking staples up to 2” in length. Please click on the links for more information:

CO2 Regulator Kit
Air Staple Guns

- I build and repair custom poker tables. I am stapling a felt or vinyl product to plywood and pressed board materials. I have no problem when I staple into plywood. When I try stapling into the pressed wood it appears to be too hard to get the staples to go all the way into the board. Most staples go part way in and bend over and have to be pulled out and tried again. I use an electric Arrow ETFX50 gun. I am using 1/4 in 6mm #504 Arrow T50 staples. I also use 8mm staples. My question is, do I need a stronger staple gun or stronger staples? Or both? Do they make stronger staples?

The Expert: - Certain press-board materials are very hard and present difficulties for electric gun tacker staplers. In those applications it is often necessary to switch to a pneumatic stapler using a heavier-gauge staple.

Before determining that, try a test with your present electric stapler: with one hand firmly pressed palm-down on the top of the stapler, staple into the material being used. This is to prevent recoil of the stapler off the surface of the material which wastes energy that otherwise is used to drive the staple flush. If the staple still buckles, or jams in the stapler, you'll need to step up in staple gauge and the associated stapler[s].

It is not necessary to have an air-compressor in order to use a pneumatic stapler; we have a very convenient and efficient CO2 portable cartridge power kit that is economically priced at $99. Please click on the links for further details and information:

CO2 Regulator Kit
Air Staple Guns

- I need advice. We have that Atro stapler(below) in earlier email, we have to staple together roughly a little less than a 1/2" of corrugated sheets together. What is your opinion on which pneumatic pliers would meet our needs.

The Expert: - We recommend either the Salco SP50-10B or the Salco SP50-777. Both use staples suitable for corrugated applications. We also carry the premium priced Bostitch P51-10B which uses the same SB103020 staple as the SP50-10B.

- Which staples would I get for the R106E? I know the 1/4" would be cutting it close for the number of sheets we have to staple. I just want standard staples. I don't know the difference between the flat wire and standard staples. Could you let me know? Thanks.

The Expert: - The 210/6EBS 1/4" staple will staple up to 20 sheets of standard bond paper. Beyond that, the 210/8EBS is required. Make sure to purchase the EBS [Electric Blue Streak ™] staple as standard round-wire staples are too soft and will jam in the electric stapler causing premature stapling head wear. The EBS staple is specifically engineered for use in production electric staplers.

More Questions...



Find Your Application

Back Next Application





© 1999-2014 Salco,Inc. All Rights Reserved. | Table of Contents |