 |
- Salco A11 hammer tacker (at the top) is used for heavy-duty tagging, insulation, rug pads, roofing, displays, upholstery, canvas framing. Medium Wire Staples:
A11/6C 1/4" [6 mm], chisel point
A11/9C 3/8" [10mm], chisel point
A11/9D 3/8" [10mm], divergent leg
(Also fits Rapid R-11 & R-34 hammer tackers)
- Bostitch H30-8 hammer tacker (second from the top) is used for Heavy Duty tagging, insulation, rug pads, roofing, displays, upholstery, canvas framing. Staples STCR5019 .050 X .019 wire size:
1/4" [6mm], chisel point;
5/16" [8mm], chisel point;
3/8" [10mm],chisel point;
1/4" SS [6mm], Stainless Steel;
3/8" SS [10mm], Stainless Steel;
- Bostitch H30-6 hammer tacker (second from the bottom) is used for tagging, tacking, decorative trim, labeling.
Staples STCR2619 .026 X .019:
1/4" [6mm],chisel point;
5/16" [8mm], chisel point;
3/8" [10mm], chisel point;
1/4" [6mm], divergent leg;
5/16" [8mm], divergent leg;
3/8" [10mm], divergent leg;
- Salco A19 hammer tacker (at the bottom) is used for tagging, tacking, decorative trim, labeling. The hammer tacker uses A19/6 1/4" [6 mm] fine wire staples.
|
© 1999-2008 Salco,Inc. All Rights Reserved.
