The Salco R105E Gangster offers the same great features as the single R105E with the added convenience of simultaneous multiple head stapling. The compact design of these tools allows the operator to staple as close as 2 1/2" from the center of each staple. The optional stand, adapter kit and table clamps enable the R105E Gangster to be used as its own work station. The Salco R105E Gangster is an inexpensive alternative to multi-head industrial staplers. 220V staplers available, call to order.

Salco is an Authorized Isaberg-Rapid factory warranty and service center.

• Speeds up production with multiple staples firing at the same time.
• The stapler's thin design allows the staples to be as close as 2.5" from the center of each staple.
• The optional 28" fiber optic cable allows the staplers to accommodate larger projects.
• When using the Adjustable Stand the tools can be set up as their own work station. This maximizes the amount of available workspace.
• Adjustable power setting
• 3.8” adjustable throat depth
• Bump switch or foot pedal activation
• Safety shield
• Optional table clamp
• Optional adjustable stand (should be completed with a table clamp and adapter kit)
• 4 rubber feet
• Spring loaded base to absorb the impact of stapling
• Interchangeable 66 series and 44 series stapling heads
• Adjustable anvil allows for outward clinch capabilities
  

• 2 electric staplers R105E
• 16" Fiber Optic Cable
  (can be upgraded to 28" cable)
• Foot Pedal
• Gang Plank
• 2 boxes of 210/6EBS 1/4" (10,000 staples)

• 28"Fiber Optic Cable
• Adjustable stand (requires 1 Adapter Kit and 2 Table Clamps for each gangster unit)
• 66 series and 44 series interchangeable stapling heads

Applications:

• 2 to 50 sheets of 20 lb copy paper
• Header cards (3.8" max depth)
• Blister packs
• Clam shell packaging
• Mailing and shipping envelopes
• Paper bags
• Trays
• Pinning layers of fabric together

The 66 series unit takes a staple that is a thin, flat wire designed for graphics use. If your application is stapling paper (preferably 20 lb copy paper, 50 sheets maximum) then the 66 series stapler would work best for you.

The 44 series unit's staple is thicker ; a staple designed for header cards, card stock, corrugated cardboard, blister packaging and clamshell packaging. As always, we suggest you send in a sample of your specialty application before placing an order so we may recommend the correct stapler for your application.